Question 1

How Much Does VERTEK Weather Armor Film Cost?

Accepted Answer

Because the product is installed by independent installers, cost varies greatly based on location, labor rates, and installer experience. To get an estimate from a local installer nearest you, please visit: VERTEK Installer Locator page

Question 2

Where Can I Have VERTEK Weather Armor Film Installed?

Accepted Answer

Yes. We have installers available worldwide. Please visit our Installer Locator page to find an installer near you.

Question 3

How Thick Is VERTEK Weather Armor Paint Protection Film?

Accepted Answer

VERTEK Weather Armor Pro is 8.0 mils (.0080 inches) thick; while Weather Armor Ultra/ Matte/ Black is 6.5mil (.0065 inches) thick

Question 4

What Will Be The Warranty of VERTEK Weather Armor?

Accepted Answer

Our VERTEK films are warrantied for 6-10 years. This warranty covers:  delaminating, cracking, peeling, bubbling, and more. More information on the warranty can be found on our Warranty Information page

Question 5

Can I Use Wax On The Film?

Accepted Answer

While wax or sealant is organic compounds, it traps dirt when the it gets hot. For best results, we recommend applying AUTOTRIZ PPF & Vinyl Wrap Coating once a year. This product has been specially formulated for use with polyurethane paint protection films to provide the maximum protection, while containing no ingredients that would cause discoloration or yellowing over time.

Question 6

How Do I Maintain The Film?

Accepted Answer

No special maintenance is required for VERTEK Weather Armor. However, the film will last longer and will be easier to clean if treated once a year with AUTOTRIZ PPF & Vinyl Wrap Coating

Question 7

Will VERTEK Weather Armor Turn Yellow Over Time?

Accepted Answer

No. VERTEK is protected with our unique formulation of nano coating which has anti-permeation technology. VERTEK is warrantied for 10 years against a range of issues including excessive yellowing. More information about the warranty can be found on our Warranty Information page

Question 8

How Deep Of A Scratch Can Film Still Heal?

Accepted Answer

The clear coat is the self-healing layer and is approximately 13 microns thick. If that layer is penetrated, the film will not heal.

Question 9

Can I Purchase Precut Film For My Vehicle?

Accepted Answer

Yes, our pre-cut kits are available for sale on our website, www.vertekfilms.com/shop, or by calling our customer support team at +15302089898. However, as installation can be quite difficult without previous experience or formal training, we recommend having installation performed by one of our Authorized Installers. To find an installer nearest you please visit our Installer Locator page to find an installer near you.

Question 10

Can I Install VERTEK Weather Armor Paint Protection Film Myself?

Accepted Answer

Other than the simplest body panels, application of paint protection film is a process which requires a good deal of experience and training to obtain satisfactory results. The compound curves present on most surfaces require the film to be stretched and compressed in a very controlled way to ensure proper adhesion without distorting the adhesive. As such, it is highly recommended that the film is professionally installed.

Question 11

Can VERTEK Weather Armor Be Installed On Your Windshield?

Accepted Answer

No. Because of the impact absorbency of paint protection film, the refractive index of the film is too different from that of the windshield. Because of this difference, putting the two together causes a distortion when looking through the glass that would be unacceptable to the vehicle’s occupants.

Question 12

What Should I Do If I'm Not Satisfied With The Installations?

Accepted Answer

It is always best to contact your VERTEK installer first and explain your concerns. We do our best to maintain a network of installers that stand behind their work. If after doing so, your installer cannot or will not address your concerns to your satisfaction, please contact our customer service team for assistance. They will get you in touch with the VERTEK Representative for your area who will work to find a solution to the issue.

Question 13

Can VERTEK Weather Armor Be Installed On My Airplane Or Aircraft?

Accepted Answer

Due to the tight tolerances on weight, balance on some aircraft and other factors like air safety regulations, we do not recommend.

Question 14

Can VERTEK Weather Armor Be Installed On Boats And Other Watercraft?

Accepted Answer

Yes. VERTEK Weather Armor can be installed on marine boats and water craft

Question 15

Can I Wash My Car Through An Automatic Car Wash?

Accepted Answer

Yes. But wait 7 days after installation to allow the film to dry completely.

Question 16

Can I Use A Pressure Washer, And How Soon After Install?"

Accepted Answer

Yes, pressure washers can be used on VERTEK Weather Armor paint protection films, provided the film has completely dried after installation (typically 7 days) and provided the high-pressure water is not pointed directly at the edges of the film.

Question 17

Will Removing The Film Harm The Vehicles Paint, Once Removed?"

Accepted Answer

It is highly unlikely for paint protection film to harm OEM paint. Paint systems used on modern assembly lines today produce a minimum bond strength of 16 MPa and maximum of 25 MPa between the panel and the paint depending on color, iridescence and the system used. Our film’s bond to the painted surface at normal state (immediately following installation) is .0753 MPa. Even after years of heat and sun, the bond between the film and the paint increases to only 0.17 MPa. What that means is in the absolute worst case scenario, the bond of factory paint to the panel is over 94 times stronger than the bond of our film to the paint. In the best case, the paint is 332 times stronger.
That being said, it is still recommended to have a professional remove the film in accordance with our published guidelines.

Question 18

Can I Have VERTEK Weather Armor Installed Over My Vinyl Wrap Or Racing Stripes?

Accepted Answer

Yes. VERTEK Weather Armor paint protection film can be applied over a vinyl wrap or graphics.

Question 19

Can VERTEK Weather Armor Be Installed On Your Vehicles Headlights And Fog Lights?

Accepted Answer

Yes. VERTEK Weather Armor paint protection film can be installed on your cars headlamps and fog lamps to prevents against rock chipping.

Question 20

Can I Use A Quick Detailer Or Detail Spray?

Accepted Answer

You may use any standard car wash soap, rinse free car wash, or detail spray to clean the film, provided that the product does not contain more than 5% naphtha or kerosene.

Question 21

Can VERTEK Be Applied Over A Vehicle That Has Had Paint Touch Ups?

Accepted Answer

Yes. Though you can install the film over any quality of touch-up, the best possible appearance will be obtained if the touched up area has been color-sanded smooth and buffed after the application of the paint.

Question 22

Can VERTEK Weather Armor Be Installed On The Interior Panels Of My Car?

Accepted Answer

Yes. VERTEL Weather Armor paint protection film can be applied to any smooth surface, though care should be taken around any electronics and/or switches so that installation fluids aren’t allowed to get into sensitive areas.

Question 23

Can VERTEK Weather Armor Paint Protection Film Be Installed On A Brand New Vehicle?

Accepted Answer

Yes. Factory paint is fully cured before the car ever leaves the assembly line.

Question 24

Can VERTEK Weather Armor Paint Protection Film Be Installed On A Fresh Painted Vehicle?

Accepted Answer

Yes. We recommend to install after full curing of paint after 2 months of re-painting.

Question 25

What Can I Use To Clean The Film With If The Film Cleaner Is Stained?

Accepted Answer

VERTEK is generally designed to resist against dirt, grime and oils that lead to yellowing over time. To remove stubborn stains from other substances such as insects, bird droppings or other compounds, use lacquer thinner or AUTOTRIZ Prep Solvent with a soft microfiber cloth, wash it with shampoo and rinse with water.

Question 26

If I Get A Partial Front Protection Option, Will The Edge Of The Film Be Noticeable?"

Accepted Answer

While the edge of the film can be seen from certain angles, people generally do not notice it unless they are looking for it. However, if the car is dirty and dust and dirt is allowed to collect along the edge of the film, it will be more noticeable. Once the car is cleaned, it will be once again difficult to detect unless looking for it.

Question 27

A Piece Of Road Debris Scratched The Film On My Car. Will This Self-Heal?

Accepted Answer

The self-healing clear coat of our VERTEK Weather Armor paint protection films is designed to repair itself from swirl marks and light scratches from car washes, etc. If a piece of debris has penetrated all the way through the clear coat on the film, it will not self-heal. The only way to fix this would be to have the piece of film replaced.

Question 28

How Can I Remove The Excess Adhesive After I Removed The Film Myself?

Accepted Answer

If there is left over adhesive upon removal, you can use a general purpose adhesive remover, often found at your local auto parts or home improvement store.

Question 29

Does The Warranty Transfer To Another Owner If Car Is Sold?

Accepted Answer

Yes. Warranty is transferable to another owner with proof of purchase and terms and conditions.

Question 30

Once The Film Has Been Removed From My Vehicle, Can I Re-Use It On Another Vehicle?"

Accepted Answer

No, the film once applied and removed cannot be reused.

Question 31

Can I Install VERTEK Paint Protection Film On Aluminum Or Brushed Metal Accents On The Car?

Accepted Answer

Any of our paint protection films can be installed on aluminum or brushed metal, though they may change the appearance to some degree depending on the film you choose. We recommend having your installer apply a small swatch of the film to the surface in question to determine the appearance prior to full installation.

Question 32

My Car Dealer Applied A Paint Sealant/ Nano Ceramic Coating To My Vehicle, Can I Have VERTEK Installed Over This Protectant?"

Accepted Answer

Waxes, sealants and protectants are typically designed to reduce the surface energy of the paint, making them easier to clean etc. A reduction in surface energy will reduce the film’s ability to adhere to the paint and could cause long term adhesion issues. Because of this, we generally recommend removing these types of products before installation. If these types of coatings are to be used, we recommend applying them AFTER installation of our paint protection film.

Question 33

Can I Apply A Ceramic Coating On Top Of The Film And How Does It Affect The Self-Healing Feature Of VERTEK?

Accepted Answer

We recommend to apply ceramic coatings to the films. But most nano ceramic coatings are Silicone base which will not bond strongly with the film. We recommend to use AUTOTRIZ PPF & Vinyl Wrap Coating ONLY.

Question 34

When I Wear Polarized Sunglasses, My Paint Protection Film Appears To Have Blemishes And Distortions, Why Is That?"

Accepted Answer

This is a very common occurrence with Paint Protection Film of all brands. It has to do with the difference in refractive index between the layer of film and the paint on the car. It is most noticeable on compound-curved surfaces because the film must be stretched over these areas to allow it to be installed without wrinkles. When the film is stretched, it becomes slightly thinner in those areas which causes the phenomenon seen through polarized glasses.
 
It can also occur on flat surfaces when the installer needs to use a drying solution (as opposed to a slip solution) such as alcohol and water to get the needed bond to the paint. This is due to the difference in viscosity of the fluids and their effect on the adhesive’s properties.
 
Polarized glasses have this effect on a number of different multi-layer surfaces (not just paint protection film) made of glass or plastic.

FAQ

Frequently Asked Questions (FAQ)